The AT2035PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2035 cardioid condenser microphone, a pair of ATHM-20x professional monitor headphones and a studio boom arm threaded with an XLR Cable. 

The adjustable studio boom arm clamps securely to desks, tables, and other flat surfaces up to 2.2" (55mm) thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360 degree rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement. 

The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate an noise, shock or vibration that's transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer.

Rounding out the pack are the ATHM-20x pro headphones, part of Audio Technica's critically acclaimed M-Series line. With 40mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions. 

Features:

AT2035 Cardioid Condenser Microphone

• Large diaphragm for smooth, natural sound and low noise
• High SPL handling and wide dynamic range provide unmatched versatility
• Custom shock mount provides superior isolation
• Switchable 80 Hz high-pass filter and 10 dB pad
• Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

ATHM-20x Professional Monitor Headphones

• Advanced build quality and engineering
• 40mm Drivers with rare earth magnets and copper-clad aluminum wire voice coils
• Tuned for enhanced low-frequency performance
• Circumaural design contours around the ears for excellent sound isolation in loud environments
• Convenient single-side cable exit

Adjustable Studio Boom Arm

• Full 360 degree rotation
• Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
• Clamps securely to desks, tables, and other flat surfaces up to 2.2" (55mm) thick
• Included XLR cable (XLR female to XLR male) extends 10' (3m) from the base of the boom arm
• Internal cable management for clean desk appearance

Specs:

• Element: Fixed-charge back plate, permanently polarized condenser
• Polar Pattern: Cardioid
• Frequency Response: 20 Hz - 20 kHz
• Low Frequency Roll-Off: 80 Hz, 12 dB/Octave
• Open Circuit Sensitivity: -33 dB (22.4 mV) re 1V @ 1 Pa
• Impedance: 120 Ohms
• Maximum Input Sound Level: 148 dB SPL, 1 kHz @1% T.H.D.; 158 dB SPL, w/10 dB pad (nominal)
• Noise: 12 dB SPL
• Dynamic Range (typical): 136 dB, 1 kHz @ Max SPL
• Signal-to-Noise Ratio: 82 dB, 1 kHz @ 1 Pa
• Phantom Power Requirements: 11-52V DC, 3.8 mA Typical
• Switches: Flat/Roll-Off; 10 dB pad (nominal)
• Weight: 14.2 oz (403g)
• Dimensions: 6.69" (170.0 mm) Long, 2.05" (52.0 mm) Max Body Diameter
• Output Connector: Integrated 3-pin XLRM-Type