PreSonus Studio 192 USB 3.0 Audio Interface/Studio Command Center

Built to Create.

The PreSonus® Studio 192 USB 3.0 audio interface delivers exceptional sonic fidelity, flexible connectivity, and professional monitoring and mixing controls in a single rack space. Whether you’re a producer, an audio engineer, an independent band, a sound designer, or all of the above, your Studio 192 was built for you to create

Your studio command center.

The Studio 192 is designed to be the central hub for any project or professional studio. The onboard talkback mic can be routed to any mix. Onboard Dim and Mono options let you take control of your main mix. Listen to any mix from either headphone amp. Use the ten balanced outputs for monitor mixing, speaker switching, or both, depending on how you work. With its flexible software and abundant I/O, the Studio 192 fits into any recording and production environment.

 

Studio 192 advanced features.

 

  • Simultaneously stream up to 26 inputs and 32 outputs at 48 kHz —8x14 at 192 kHz.
  • Take advantage of Studio One® Fat Channel plug-in processing on every analog input and the first eight ADAT input channels, with near-zero-latency (2 ms, input to output) monitoring.
  • Use the Studio 192 as your studio command center with monitor mixing, speaker switching, and two independent headphone outputs.
  • Remote control your XMAX preamps and monitor mixes from UC Surface, Studio One, and Studio One Remote for iPad®
  • Expand your I/O by adding a DigiMax DP88 8-channel A/D/A converter with remote-controllable preamps.

 

Superior sound.

Audiophile-grade digital converters, ultra-low jitter clocking, and recallable preamps add up to a superior recording and listening experience. The Studio 192 operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality Burr-Brown converters on every input and output provide 118 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our recallable XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you’ll hear every breath, transient, and detail in your recordings.

XMAX preamps.

XMAX preamplifiers are built with three key elements:

  • Class A. Class A circuits have no crossover distortion and deliver purer, clearer, and more musical results than the Class AB designs that are found in many preamps.
  • High Voltage. The XMAX preamplifier runs on power rails of 30V. Most off-the-shelf, op-amp-based designs run on power rails of 10V to 18V. Higher-voltage power rails deliver more headroom, deeper lows, smoother highs, and a richer overall sound.
  • Discrete components—not op-amps. We only use genuine transistors, resistors, and capacitors. Op-amps add noise, coloration, and harshness to a signal. Our discrete design delivers ultra-low noise and transparency.

The net result of the XMAX preamp design is high headroom, low noise, wide dynamic range, extended frequency response, and—most important—musicality and transparency.

The Studio 192’s XMAX preamps offer another advantage: They are recallable. In 1995, PreSonus patented digital control over analog circuits with our first studio product. Building on this legacy, we created a separate digital volume-control circuit ahead of our analog XMAX preamp design, providing the convenience of digital recall without sacrificing fidelity. The preamps can be controlled from the unit’s front panel, from UC Surface control software, from Studio One’s mixer, from Studio One Remote, and via MIDI in Pro Tools, Logic, or Live so you can save the settings with your recordings.

The Studio One in Studio 192.

With the Studio 192, your audio interface is an integrated extension of your recording environment. Launch Studio One® 3, and you’ll find full preamp control and monitor-mix functions integrated into your recording environment. Our hybrid Fat Channel plug-in runs on the Studio 192’s DSP and in Studio One on your computer so you can record and monitor with Studio 192-based processing and seamlessly switch to the Studio One Fat Channel for playback. Need to track away from your computer? Launch Studio One Remote on your iPad®.

Studio One’s Z-Mix makes the magic happen.

Since the first release of Studio One, PreSonus interface customers have been able to set up monitor mixes using Studio One’s unique Z-Mix feature. This feature provides dedicated level and pan control with a Z-Mix (“z” for zero latency) option for designated Cue Mix outputs—all from the Studio One mixer.

With the Studio 192 we’ve added a new level of integration with our new hybrid plug-in format. The Studio One Fat Channel is the first plug-in to take advantage of this format. The hybrid plug-in format allows it to run either on the DSP engine in a piece of hardware or on your computer’s processor in Studio One. During recording, the plug-in runs on the Studio 192 DSP. During playback, it runs on your computer.

In addition, Studio 192 users will find preamp controls in the Studio One mixer simply by selecting a preamp input as the source for an audio track. Because Studio One and the Studio 192 are built on the same platform, there’s no setup and no configuration. Just launch Studio One and go.

To top it off, Studio One Remote not only provides wireless remote control over your Studio One session from your iPad®, it now provides wireless control over your Studio 192’s preamps and Z-Mix functions, as well, allowing you to make gain-stage adjustments and fix your monitor mix when your tracking on your own away from your computer.

Remote control with UC Surface, too!

The Studio 192’s onboard features can also be controlled in PreSonus’ free UC Surface control software, so even if you use third-party recording software, you can remotely access them. UC Surface has rapidly won accolades for an intuitive mixing interface that provides quick access to everything you need to create quality monitor mixes.

UC Surface and the Studio 192.

In addition to creating high-quality monitor mixes, UC Surface can also be used to turn your Studio 192 into a speaker-management system by providing speaker switching plus main-mix mono and dim functions. Listening to your mix on multiple pairs of reference monitors can reveal new insights. Enabling speaker-switching mode in UC Surface allows you to listen to your main mix through three different output pairs on your Studio 192 and switch between them.

Great signal processors are a PreSonus tradition.

Adding just the right amount of effects and processing to a monitor mix can make a huge difference in a musician’s ability to experience their performance naturally. To that end, the Studio 192 provides sixteen instances of Studio One’s Fat Channel plug-in, one for every analog input and the first ADAT inputs, plus a stereo reverb and delay. The result is a better performance and a better recording.

Fat Channel processing.

The Fat Channel suite of studio-grade signal processors evolved from our classic ACP88 compressor/gate and was first incorporated into our StudioLive mixers. The musical, natural sound of the combined signal path quickly made StudioLive mixers famous for their ability to help create great-sounding mixes.

The Fat Channel includes a highpass filter, noise gate with key listen, compressor, 4-band parametric equalizer, and limiter. Fifty factory presets, created by professionals, are included to help you quickly create the sound you want. Fat Channel presets can be created in UC Surface or in Studio One and can be shared between the two. You can also share settings with other Studio One, StudioLive, and Studio 192 users.

Expandable when you need more I/O.

The Studio 192 has 18 digital inputs and outputs, allowing you to add more analog I/O when you need it. The DigiMax DP88 preamp/converter was designed to seamlessly extend the analog I/O on the Studio 192 with eight digitally-controlled XMAX preamps, ADAT I/O support up to 96 kHz, direct analog inputs, DAC outputs, and word clock I/O. Its mic preamps are fully remote-controllable from UC Surface, Studio One, and Studio One Remote when connected via ADAT Lightpipe to the Studio 192 so that they naturally extend your analog inputs both sonically and functionally.

Get your hands on a Studio 192.

The Studio 192 gives you a powerful combination audio interface and studio command center. With pristine audio up to 192 kHz, monitoring with DSP effects, remote-controllable preamps, monitor mixing, speaker switching, a headphone amp, and unprecedented Studio One integration, it gives you a portable recording solution like no other. 


What Artists Have to Say

Dre Energy

Paul Meany of MUTEMATH

Jessie Kol and Perry Sorensen

Subscribe